几何造型器

几何造型系统是指能够定义、描述、生成几何模型,并能够进行交互编辑处理的系统称为几何造型系统。采用几何造型技术,可以将物体的形状及其各种属性存储在计算机内,形成该物体的几何模型。这样的几何模型是对原物体确切的数学表达,或对其某种状态的真实模拟。
OpenCASCADE PCurve终极问题-卡核

OpenCASCADE PCurve终极问题

OpenCASCADE PCurve终极问题 eryar@163.com   Abstract: Geometry Curves and Surfaces in BRep are parametric equations. So given a parametric space curve and a geometry surface ca...
OpenCASCADE BRepTools-卡核

OpenCASCADE BRepTools

OpenCASCADE BRepTools eryar@163.com Abstract. OpenCASCADE BRepTools provides utilities for BRep data structure. OuterWire method to find the outer wire of a face. Dump method to du...
清华笔记:计算共形几何讲义 (10)纪念米尔扎哈尼——泰希米勒(Teichmuller)空间-卡核

清华笔记:计算共形几何讲义 (10)纪念米尔扎哈尼——泰希米勒(Teichmuller)空间

多年以前,我还在哈佛求学,导师丘成桐先生叮嘱我要研究柯蒂斯. 麦克马伦(Curtis McMullen)的理论,McMullen用组合的方法来研究共形结构,非常适合计算。丘先生自己也在哈佛的研究生课程上讲解...
Levmar:Levenberg-Marquardt非线性最小二乘算法-卡核

Levmar:Levenberg-Marquardt非线性最小二乘算法

Levmar:Levenberg-Marquardt非线性最小二乘算法 eryar@163.com Abstract. Levmar is GPL native ANSI C implementations of the Levenberg-Marquardt optimization algorithm.The blog focus on...
EasyMesh - A Two-Dimensional Quality Mesh Generator-卡核

EasyMesh – A Two-Dimensional Quality Mesh Generator

EasyMesh - A Two-Dimensional Quality Mesh Generator eryar@163.com Abstract. EasyMesh is developed by Bojan Niceno, it is a two-dimensional quality mesh generator. EasyMesh can...
Create New Commands in Tcl-卡核

Create New Commands in Tcl

Create New Commands in Tcl eryar@163.com 摘要Abstract:Tcl/Tk脚本可以很容易实现用户自定义的命令,方便的创建图形化的用户界面GUI,所以Tcl和Tk的应用领域几乎覆盖了图形和工程应用的全部...
Clash Detection-卡核

Clash Detection

Clash Detection eryar@163.com Abstract. Clash detection is used for the model collision check. The paper introduce the clash detection in PDMS, and also about how to set the piping...
Netgen mesh library : nglib-卡核

Netgen mesh library : nglib

Netgen mesh library : nglib eryar@163.com 摘要Abstract:本文主是对Netgen的库nglib的用法进行介绍。主要参考资料是Netgen用户指南。最后给出一个具体程序实例。  关键字Key Words:Net...
清华笔记:计算共形几何讲义 (21)离散曲面曲率流 (Discrete Surface Ricci Flow)III-卡核

清华笔记:计算共形几何讲义 (21)离散曲面曲率流 (Discrete Surface Ricci Flow)III

以前章节,我们介绍了曲面曲率流的一种离散形式-离散Yamabe流,主要操作是顶点缩放(Vertex Scaling)来共形变换度量来实现目标曲率。在实践中,往往多面体曲面的三角剖分是固定的。如果给定一...
Geometry Surface of OpenCascade BRep-卡核

Geometry Surface of OpenCascade BRep

Geometry Surface of OpenCascade BRep eryar@163.com 摘要Abstract:几何曲面是参数表示的曲面 ,在边界表示中其数据存在于BRep_TFace中,BRep_TFace中不仅包括了几何曲线,还包含用于显示的离...
Locations Section of OpenCascade BRep-卡核

Locations Section of OpenCascade BRep

Locations Section of OpenCascade BRep eryar@163.com 摘要Abstract:本文结合OpenCascade的BRep格式描述文档和源程序,对BRep格式进行分析,详细说明BRep的数据组织形式。本文主要通过对BRep...
清华笔记:计算共形几何讲义 (8)狭缝映射(Slit Map)的存在性-卡核

清华笔记:计算共形几何讲义 (8)狭缝映射(Slit Map)的存在性

我们用较为初等的复变函数方法证明一种共形映射的存在性:狭缝映射(slit mapping)。如图所示,给定亏过为0的多连通曲面,存在共形映射将其映射到平面区域,每个边界的联通分支都被映成一条狭...